RECR-2063 | LED Lightbox

VK-2948 SuperNova Inline Lightbox -- Image 2RE-2063 SuperNova Lightboxes -- Separate .VK-2948 SuperNova Inline Lightbox -- Rear Reflector SEG Fabric VK-2948 SuperNova Inline Lightbox -- Plan ViewVK-2948 SuperNova Inline Lightbox -- Optional Double-sided VersionVK-167 -- 10 x 10 VersionEngineered SuperNova LED LightsMOD-550 Portable Roto-molded Cases with Wheels (26" W x 11" D x 54" H)MOD-550 Portable Roto-molded Cases with Wheels
RE-2063 and VK-2948 SuperNova Lightbox PhotosVK-2948 SuperNova Inline Lightbox -- Image 1VK-2948 SuperNova Inline Lightbox -- Image 2RE-2063 SuperNova Lightboxes -- Separate .VK-2948 SuperNova Inline Lightbox -- Rear Reflector SEG Fabric VK-2948 SuperNova Inline Lightbox -- Plan ViewVK-2948 SuperNova Inline Lightbox -- Optional Double-sided VersionVK-167 -- 10 x 10 VersionEngineered SuperNova LED LightsMOD-550 Portable Roto-molded Cases with Wheels (26" W x 11" D x 54" H)MOD-550 Portable Roto-molded Cases with Wheels

Rental

$5530
add $3157 for Graphics

Purchase

$17,900
$19,200 for Double-sided Lightbox
  • Visionary Designs SEGUE Hybrid Display
  • Take It to the Edge with Silicone Edge Graphics
  • SuperNova™ LED Technology (attached)
  • SEGUE RE-2063 Hybrid Display
  • See VK-2948 for the Purchase Version
  • Dims: 228" W x 95" H (w/ 3 frames)
  • Modular Construction
  • Engineered Aluminum Extrusion
  • SuperNova™ LED Lights
  • Black or Silver Finish
  • (2) Front Silicone Edge Fabric Graphics (approx. 57" x 95" ea.)
  • (1) Front Silicone Edge Fabric Graphic (approximately 114" x 95")
  • (3) Rear SEG Reflective Fabric

  • Graphics Not Included in Base Price
  • Made in the USA

    Estimated Crate Dimensions and Weight

    (1) 103” L x 55” W x 27” H @ 450 lbs. (Estimate Only)Portable Modular Assembly: Hex Key Connections (tool included)

    NOTE

  • Single-sided Version CAN ONLY be Single-sided. Double-sided Version CAN Be Single or Double-sided

VK-1967 and VK-2948 (RE-2063) SuperNova Inline Lightboxes

VK-2948 SuperNova Inline Lightbox -- Image 1The innovative SuperNova™ LED Inline lightboxes combine exceptionally bright LED lights, modular engineered, an aluminum frame, and silicone edge fabric graphics into a brilliant eye-catching display. The SuperNova LED lights are attached to the frame which makes assembly easy and packaging a snap. 10 ft. and 20 ft. versions are available, in both one-sided and two-sided lightboxes. All have integrated cord management. You won't believe your eyes the first time you flip the switch and see how stunning a backlit graphic can be.

VK-2948 SuperNova Inline Lightbox -- Image 2The lightboxes use SuperNova LED lights, ensuring an exceptionally bright graphic and thousands of hours of worry-free use.

Need a lightbox solution not shown? Let us know. We're happy to design the perfect solution for you.

Features and Benefits:

  • 10 and 20 ft. Versions
  • SuperNova™ LED Technology
  • Lightweight Engineered Aluminum
  • Convenient Cord Management
  • One or Two-sided Lightbox Versions
  • Silicone Edge Fabric Graphics (SEG)
  • Easy Modular Assembly
  • Integrated Cord Management
  • Made in the USA

OTM Table and Chairs w/ Seatbacks

$2768
$2928 w/ Graphics
  • OTM-100 Portable, Brandable Table and Chairs
  • Trade Show, Event, and Retail Displays
  • OTM-100 Table and Chairs with Seatback (OTMB/OTMW-201)
  • See OTX-100 for an Alternate Version
  • Download the NEO Product Line Brochure and Price List
  • Table Dims: 34" W x 38" H
  • Chair Dims: 20" W x 41" H
  • (1) Portable Table with Inlay Counter Top
  • (2) Portable Chairs with Inlay Seat and Seatback
  • (1) Table Shelf
  • Blank White or Black Sintra Inserts
  • Colors: White and Black (Paint)
  • Birch, and Aluminum Construction
  • Silver Footrests (Unless Specified White or Black)
  • Portable Modular Design
  • Recommend Weight Limits: 265 lbs. Chair and 50 lbs. Table

  • Base Price Excludes Inlay Graphics
  • Excludes Case and Packaging
  • Table and Chairs Available without Inlay Cut
  • Made in the USA
  • Patent No.: US D716,569 S (chair) / Other Patents Pending

    Portable Assembly: Interlocking Components and Self-locking Plunders
    Recommended Case/Packaging: (1) OTM-551 Roto-molded Case with Wheels and Jigging or the OTM-553 Corrugated Box with Foam Packing.

RECR-2063 | LED Lightbox

Documentation for RECR-2063 | LED Lightbox

Frequently Asked Questions

  1. Why should I consider renting vs. purchasing an exhibit?

    1. Cost
    Plain and simple, renting displays costs less.

    2. Invest Wisely
    Renting displays allows you to spend more of your budget on your trade show graphics and messaging.

    3. Flexibility
    Different trade shows appeal to different attendees. Renting displays offers the flexibility of changing your display and graphics from show to show.

    4. Overlapping Trade Shows
    Don't choose between attending two important trade shows. Renting displays means you can have an effective presence at both shows.

    5. Upgrading
    Flexibility is important to every business or organization. When you rent your exhibit, you can change your display quickly because your resources aren't tied up in the structure. This gives you the freedom to target your marketing messaging and graphics for specific trade shows. Plus, renting means you can move into a larger space if and when you need to.

    6. Installation & Dismantle Included
    When you rent, install and dismantle can be included, eliminating one less hassle.

    7. No Storage Expense
    Storing a display can be expensive, prepping it can be time consuming, and shipping it can be confusing. When you rent, there is no storage expense and there are no delivery or prep hassles.

    8. Testing
    Renting offers the benefit of testing a trade show display before you invest in its purchase. When you make the decision to purchase, you will know you have made the right choice.
     

  2. I have reserved a space for our industry show. I need an island, but I do not have the budget to purchase one this year. What are my options?

    Renting an exhibit is the ideal choice in this situation. Renting is affordable, typically 30-40% of a purchase, and we have an extensive gallery of island and inline rental designs.
       
    If you don’t see something you like, no problem. About 50 percent of our rentals are new designs or modifications of existing designs. If it makes sense for you, and it makes sense for us, then we’re happy to create a unique configuration that meets all your trade show marketing requirements. 

    Just give us a call so we can begin designing the exhibit that matches your budget and marketing needs.

  3. Are there rental accessories such as lights, table tops, cases, pedestals, and workstations?

    Yes, these are over 100 options located in the Rental Accessories Gallery. Don't see exactly what you need? Give us a call.

  4. Will I own the graphics if I rent an exhibit design?

    Yes, the graphics are purchased. This is an important distinction, especially when comparing a rental vs. a purchase. When you rent, you only rent the hardware, not the graphics. However, if you re-rent the same exhibit and reuse your graphics, you can subtract the cost of the graphics, making the second rental less expensive.

  5. Does it ever make sense to combine some rental components with an existing exhibit that we already own?

    Many exhibitors blend rental components with their existing exhibit. For example, your exhibit may include the main structure, like a tower and a conference room. Renting the workstations, kiosks, or other accessories will allow you to mix and match components depending on your show requirements. In addition, it allows you to “test-drive” components to see if there’s a long-term need.

  6. Do rentals offer more design flexibility and less hassle?

      Yes, with rentals you can literally change your exhibit design for every show. Plus, you will never have storage costs or staging issues to deal with.

  7. Are multiple show discounts available for rental exhibits?

     Yes, many rental exhibit suppliers offer discounts for multiple show commitments depending on the show dates and locations. It is definitely worth asking about.

  8. How will I be assured of a high-quality exhibit and that the graphics will fit correctly?

     Always ask for examples and references. Professional rental suppliers will provide you with detailed staging photos and/or a live video preview before the exhibit ships to show. For larger island designs, consider scheduling an in-person preview.

  9. Is I & D (installation and dismantle) typically included with rentals?

     Many rental providers offer full turnkey services. Either way, remember that there’s a cost to I&D whether it’s a line item or buried in the cost of the rental. Always cover this and any other services you want with your rental supplier.

  10. If I choose to use my own labor company are clear setup instructions typically provided.

    Yes, most exhibit companies provide setup instructions. However, some are better than others. Make sure you see examples from past projects to make sure they are detailed and complete. Also make sure that they provide detailed diagrams and staging photos, and that someone from production is available 24/7 to answer a call with questions during the setup. Sometimes a quick call can save hours of labor on the show floor.

  11. How will I know that everything is packed up and included in the shipment?

    It’s best to use a vendor that provides a complete inventory list with all of the components checked off by the production team as they pack the crates before shipping. Ideally, they will provide packing photos that show each layer of components in every crate(s). You need to be confident that every part and component is packed and ready to go when the labor team starts the setup.

  12. When I rent an exhibit, am I responsible for damages that may occur during the set-up or take-down? If so, what is typically considered wear and tear versus outright damage?

    Rental vendors usually understand that their exhibit components are going to suffer some normal scuffs and scratches. With that said, when the scuffs and scratches turn into gouges and holes, there’s often a repair or replacement fee to cover costs. But if the exhibit vendor provides the installation and dismantle service, any damage fees would more than likely be paid by the labor company.

  13. For multiple show rentals, do rental companies offer storage services if I choose to reuse the same graphics?

    Yes, a lot of companies do offer storage services. Many will store the graphics at no charge if there’s a commitment to re-rent the same exhibit design for a future show or shows. Always determine what you would like to do with the graphics before shipping the exhibit to the show. If you decide to take the graphics with you after the show, you may need to request special packaging. This won’t be necessary if you make arrangements to ship them back with the exhibit.

  14. Am I responsible for coordinating the round-trip shipping of a rental?

    Your exhibit provider usually offers shipping services, but most are flexible about shipping arrangements.

    You will definitely want to discuss whether it makes more sense to go direct to the show or to the advanced warehouse. There are multiple scenarios to consider when making this decision. It often depends on how many days there are between the advanced warehouse deadline and the show date. The rental period (or time the vendor allows the exhibit properties to be out) also comes into play. Review all of this and make the appropriate decisions based on your specific show.

  15. How much customization is typically offered with rental exhibits?

    It is virtually impossible to walk a show floor today and identify which exhibits are rental versus purchased. Most rental designs have some customization, and many are custom designed for specific companies and specific shows.

    Quite often, a few custom elements added to the design can give the entire design a custom look even if it’s as simple as some colorful laminated workstations, shelves, or a reception counter. Custom laminated soffits and backlighting are also nice touches that are inexpensive and well worth the investment. As a bonus, if you re-rent the same exhibit, your second rental will most likely be less expensive, since your first rental covered the cost of those custom components.

Product Warranty

Classic Exhibits Inc. warranties the performance of its portable, modular, and custom hybrid systems during normal use, excluding excessive wear and tear, as per the instructions. This covers the workmanship and locking systems as long as the exhibit has a useful life. All remaining parts are covered against defective materials or workmanship as long as the exhibit is in service. The warranty is transferable should the product be sold or assigned to another party.

The manufacturer cannot be held responsible for damages due to abuse, misuse, or shipping damages. This warranty does not cover laminate cracks and chips, wood crate and roto-molded case damage (excluding workmanship), aluminum extrusion scuffs, mars, and scratches from normal use, and graphics wear and tear or misuse. The manufacturer is not responsible for lost or missing parts once the owner has assembled, accepted, and used the product.

Should there be any questions regarding the warranty, please contact your local Classic Exhibits Distributor.

Lead Time

The lead time for the RECR-2063 | LED Lightbox is 15 - 20+ Business Days - Click for Details.

  • Suggested lead times may vary depending on current orders. Please check with Customer Service.
  • Production lead times are based on business days and DO NOT include any shipping days.
  • Production-ready artwork (when applicable) must accompany the order confirmation. Delays in uploading artwork may lead to expedited charges or shipping changes.
  • No order will be released to Production without a signed order confirmation.
  • Shipping is based on the availability of materials and graphics. Additional charges may apply if materials or graphics must be expedited.
  • Standard lead times do not apply to orders of multiple quantities.

Exhibit Weight

Exhibit Weight varies depending on the packaging and the shipping method. Variables include but are not limited to:
  • Dimensional Weight vs. Actual Weight: Dimensional weight is defined as crate or case size. On most air shipments, the dimensional weight exceeds the actual weight
  • Portable Cases vs. Wood Crates or Molded Tubs (where applicable): Exhibit designs that require one wood crate would require multiple portable cases. Selecting one vs. the other affects the total weight (dimensional or actual).
  • Freight Carrier: LTL carriers (Less than Truckload) quote freight based on space used. UPS, FedEx, and air freight carriers quote freight based on either the dimensional or the actual weight of the shipment.
  • Freight Service Level (number of days): Service levels range from Same Day Delivery to Two Week Delivery.
For more information about exhibit weights and freight options, please contact your local exhibit representative.

Electrical/Cord Management

Electrical, Cord, and Wire Management varies depending on the display and each exhibitor's requirements. When ordering your trade show display, consider the following electrical/wire management issues and discuss your options with an exhibit professional:
  • Inline vs. Island Displays
  • Lead Retrieval Devices
  • Computer and Monitor Cables
  • Demo Equipment
  • Overhead Lighting
  • Grommets and Grommet Placement in Counters
  • Overhead vs. Floor Power Supply
  • Flooring and Electrical Wiring
  • Options for Hiding Cords and Cables
  • Flat vs. Round Electrical Cords
  • Multi-Plug Outlets and Extension Cords
By reviewing your wiring options BEFORE you order your display, you'll save TIME and MONEY and ensure your exhibit exceeds your expectations and your installation is trouble-free.

Add designs and photos to your personal gallery simply by clicking on the +My Gallery links

Then email your "My Gallery" to colleagues, friends, or your favorite exhibit designer. There's no better way to begin designing a display that reflects your exhibit marketing goals.

Note: My Gallery uses a temporary browser cookie to store your gallery. We recommend that you send your gallery to your email address if you need to retain it for longer than 30 days.

  • Suggested lead times may vary depending on current orders. Please check with Customer Service.
  • Production lead times are based on business days and DO NOT include any shipping days.
  • Production-ready artwork (when applicable) must accompany the order confirmation. Delays in uploading artwork may lead to expedited charges or shipping changes.
  • No order will be released to Production without a signed order confirmation.
  • Shipping is based on the availability of materials and graphics. Additional charges may apply if materials or graphics must be expedited.
  • Standard lead times do not apply to orders of multiple quantities.
Exhibit Weight varies depending on the packaging and the shipping method. Variables include but are not limited to:
  • Dimensional Weight vs. Actual Weight: Dimensional weight is defined as crate or case size. On most air shipments, the dimensional weight exceeds the actual weight
  • Portable Cases vs. Wood Crates or Molded Tubs (where applicable): Exhibit designs that require one wood crate would require multiple portable cases. Selecting one vs. the other affects the total weight (dimensional or actual).
  • Freight Carrier: LTL carriers (Less than Truckload) quote freight based on space used. UPS, FedEx, and air freight carriers quote freight based on either the dimensional or the actual weight of the shipment.
  • Freight Service Level (number of days): Service levels range from Same Day Delivery to Two Week Delivery.
For more information about exhibit weights and freight options, please contact your local exhibit representative.
Electrical, Cord, and Wire Management varies depending on the display and each exhibitor's requirements. When ordering your trade show display, consider the following electrical/wire management issues and discuss your options with an exhibit professional:
  • Inline vs. Island Displays
  • Lead Retrieval Devices
  • Computer and Monitor Cables
  • Demo Equipment
  • Overhead Lighting
  • Grommets and Grommet Placement in Counters
  • Overhead vs. Floor Power Supply
  • Flooring and Electrical Wiring
  • Options for Hiding Cords and Cables
  • Flat vs. Round Electrical Cords
  • Multi-Plug Outlets and Extension Cords
By reviewing your wiring options BEFORE you order your display, you'll save TIME and MONEY and ensure your exhibit exceeds your expectations and your installation is trouble-free.